- 11 -
2.4 Enclosure
2.4.1 LCM
There are four buttons to control LCM (LCD Control Module), including:
c
(up),
d
(down),
ESC
(Escape), and
ENT
(Enter).
After booting up the system, the following screen will be shown:
ENHANCE
RAC2 81
←
Press
“ENT”
, the LCM functions
“Alarm Mute”
,
“Reset/Shutdown”
,
“Quick
Install”
,
“View IP Setting”
,
“Change IP Config”
and
“Reset to Default”
will be
rotate by pressing
c
(up) and
d
(down).
The following table is function description.
Alarm Mute
Mute alarm when error occurs.
Reset/Shutdown
Reset or shutdown controller.
Quick Install
Three steps to create a volume. Please refer to section
3.3 for operation in web UI.
View IP Setting
Display current IP address, subnet mask, and gateway.
Change IP
Config
Set IP address, subnet mask, and gateway. There are 2
selections, DHCP (Get IP address from DHCP server) or
set static IP.
Reset to Default
Reset to default will set password to default:
1234
, and
set IP address to default.
Default IP address:
192.168.0.1
Default subnet mask:
255.255.255.0
Default gateway:
192.168.0.254
