SynCardia Companion 2 Driver System, Operator'S Manual

Page: 79 / 134

SynCardia Systems, LLC
Companion 2 Driver System Operator Manual
Page 79 of 132
13.3.3. Verify that the display shows that the Battery is properly installed.
If the Battery Power Status Window looks like Figure 13-8 after
installing the Battery, remove and reinsert the Battery. If the
problem occurs again, replace the Battery with a spare Battery.
13.3.4. To insert a Battery, put the bottom of the Battery into the Driver
and push the Battery towards the Driver. An audible “snap”
indicates that the latch has secured the Battery to the Driver.
Correct battery installation can be verified by the Batteries
appearing as shown in
Figure 13-6 and by pulling the Release
latch (without depressing it) ( Figure 13-7 ) away from the Driver
(the Battery will remain in place).
13.3.5. The Battery Indicator LED in the Driver Power Status LED Array,
Figure 13-9 , flashes green when the batteries are being charged.
Figure 13-9 – Driver Power Status LED Array
Alarm Indicator
External Power
Indicator
Emergency Battery
Indicator
External Battery
Indicators