SynCardia Companion 2 Driver System, Operator'S Manual

Page: 59 / 134

SynCardia Systems, LLC
Companion 2 Driver System Operator Manual
Page 59 of 132
Verify that the TAH-t continues to operate in a partial fill/full eject
condition, as described in
Section 8.2.5 , Optimization of
Adjustments .
9.2.2. The following parameters may be changed:
•
Rate
•
% Systole
•
Left Pressure
•
Right Pressure
•
Left Vacuum
•
Right Vacuum
9.2.3. The general instruction to change each of the operating parameters
is the same. Using RATE as the example, the operating parameters
are adjusted as follows:
(1) Unlock the LOCK icon by selecting it.
(2) Press the RATE button on the LCD screen.
(3) Select “+” or “-” to increase or decrease the rate.
(4)
Select “√” to enter the change or “X” to cancel the change.
(5) A confirmation screen will appear asking: “Are you sure you
want to change?”
(6)
Select “√ YES” to confirm the change or “X NO” to cancel the
change.
(7)
Once you select “√ YES”, your change is immediately
initiated.
(8) After making changes to any of the parameters, select the
UNLOCKED icon to return to the locked position.
9.2.4. Holding the “+” or “-” button for two seconds will cause the
parameter to immediately change by increased increments, as
shown in
Table 9-1 .