Configuration Menu
Name
Personalise the name of your charger. This helps if more than one charger is installed in the
location. The name is displayed on the Home Charger Screen above the photo.
Location
The location your charger can be set on the Sync EV map. This information can then be
shared with other Sync EV users only if chosen to be made public.
Photo
Personalise the picture of the chargepoint in the app. Again, this can help with
Identification.
Smart Charging
See the Smart Charging section of the guide on page 5.
Authentication
When Authentication is enabled the registered app user will receive a notification to start a
charging session once the cable has been inserted. This prevents unwanted use of the
charge point. When disabled the unit will charge immediately after cable is inserted.
Power Management
Charge rate can be adjust from 6A to 32A
Keep-awake Mode
Please see Smart Charging section on page 5
LED Ring Brightness
Adjust the brightness of the chargers light between High, Medium & Low.