SYNAPTICON SOMANET OBLAC Drives Box, Commissioning And Tuning, Page: 22 / 67

Note
Note
Please ensure that the release you want to install supports the firmware that you want to run on
Please ensure that the release you want to install supports the firmware that you want to run on
your drive.
your drive.
See details for Updating/downgrading OBLAC Drives .
1.3.1.1 Save to device
This operation will save all parameters to the config.csv file. When the device is power-cycled it will
load this file.
Note
Note
When a parameter is entered, this change will be lost after power-cycling the device unless it is
When a parameter is entered, this change will be lost after power-cycling the device unless it is
saved to the device manually.
saved to the device manually.
​
1.3.1.2 Update Firmware
When this button is clicked, a box appears listing the most recent firmwares available for your
hardware.
The list is being filtered by the device hardware description and the running release of OBLAC Drives.
​
1.3.1.3 Launch Setup Wizard
This intuitive tool helps you enter the specifications of attached motors, sensors, gear and brake.
Details can be found in the section Set up your servo drive .
​
1.3.1.4 Download Device Description XML
The Device description is an XML file that contains all the objects used and their properties.
For EtherCAT devices this is ESI (EtherCAT Slave Information).
Commissioning and Tuning with SOMANET OBLAC Drives
© 2020 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 3.2.0 | Build: 2020-05-25 22/67