manualshive.com logo in svg

SYNAPTICON SOMANET OBLAC Drives Box, Commissioning And Tuning, Page: 16 / 67

Share
Download
SYNAPTICON SOMANET OBLAC Drives Box Commissioning And Tuning Download Page 16

Linux

2.  Install and open VMware Workstation Player

Note

Note

ANY version of VMWare Workstation Player starting from 14.0 can be used for OBLAC Drives.

ANY version of VMWare Workstation Player starting from 14.0 can be used for OBLAC Drives.

3.  Open a virtual machine

4.  Select the downloaded OBLAC Drives image (OVA file) and import it to VMware Player

Note

Note

If you get a warning that the import failed, just click “Retry” and it will run.

If you get a warning that the import failed, just click “Retry” and it will run.

You may also check “Do not show this message again”

You may also check “Do not show this message again”

5. 

Go to Virtual Machine Settings and check if two network adapters are available - one set to
NAT and one set to Bridged (Automatic)

Ensure that the “Replicate physical network connection state” option is checked

Press OK to save changes

6.  Network settings

Execute

sudo /usr/lib/vmware/bin/vmware-netcfg

Commissioning and Tuning with SOMANET OBLAC Drives

© 2020 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich   Documentation v 3.2.0 | Build: 2020-05-25

16/67

Summary of Contents for SOMANET OBLAC Drives Box




































































Reviews:

No comments