Note
Each Digital IO needs to be configured as a Digital Input or Output via object 0x2210 (“GPIO”).
The object can also be used to activate a pull-down resistor.
Changes may require to powercycle the servo drive.
1.2.6 Analog IN
Pin #
Default setting
*
1
–
2
Analog Input 4
Single-ended 0-5 V
3
Analog Input 3
Single-ended 0-5 V
4
Ground
5
Analog Input 2
Single-ended 0-5 V
6
Analog Input 1
Single-ended 0-5 V
7
5 V
8
10 V
* All Analog Inputs can be configured as single-ended 0-5 V, 0-10 V independently. Upon request only,
please contact
Hardware Manuals / SOMANET Node / SOMANET Node rev. C.4 /
Installation Guide
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.7.3 | Built 2021-03-29
11/17
