Establishing Connectivity to the E10
Chapter 4: Power and Connectivity
Accessing via Serial Port
600034-01A
SNAP Connect E10 User Guide
Page 25
ESTABLISHING CONNECTIVITY TO THE E10
The E10’s Linux-based design provides a wide range of supported connectivity options.
The remainder of this chapter explores the different ways you can connect to your unit.
See the following sections for more information:
Accessing via Serial Port
(below)
Accessing via Ethernet Interface
on page 26
Accessing via SNAP Wireless
on page 29
Accessing
via Serial
Port
The micro-USB cable that provides power to the E10 also provides USB-serial access to
the “ttys0” UART of the E10.
By default, this port is configured to be a Linux serial console. The UART settings are as
follows:
115200 bps
8 data bits
no parity bit,
1 stop bit
E10s ship from Synapse with a default username of
root
(and no password).
Note:
You should change your E10 password as soon as possible, using the
passwd
command.
Here is a sample terminal session: