SimplySNAP
Continued
Page 6
SimplySNAP Quick Install Guide
Adding Lights
To add a light, access the SimplySNAP dashboard and then click the
Devices & Zones
menu choice in
the Left Menu Bar.
To add a new light:
1. Click the
Add Light
Icon near the top of the page.
2. Enter the desired name for the light, the
SNAP Address for the light controller and
the controller type into the provided fields.
This information is required as a minimum.
Other information may be entered as desired
including a description, the zones the light will
be included in, light location, etc. You can also
position a light using the map view by clicking
and dragging the light bulb icon to reposition
the light.
3. Click the
Save Changes
button to save, or the
Cancel
button to exit without saving changes.
On a successful save, a green light panel for
the newly added light will appear in the content
area of the display.
Each light is added individually by invoking this
dialog to add additional lights. When all lights are
entered, SimplySNAP will be ready to control your
lighting system.
When a light is entered, it can be controlled from
the
Lights and Zones
page. All lights can be
controlled by clicking the
On/Off
switch on the
blue “All” zone icon or dragging the slider to a specific illumination level.
Each individual light may be controlled similarly by clicking the
On/Off
switch on the green icon for
each individual light or dragging the slider to create a specific brightness level for each light.