
Troubleshooting
259
Synapse SB67030/031 Deskset and Accessories User’s Guide
You are unable to locate the
Cordless Handset from the
Deskset.
The Cordless Handset’s
battery is dead.
Charge the Cordless Handset battery.
The Cordless Handset is out
of range or not registered.
If
does not appear on the Deskset Idle screen,
then the Cordless Handset is not registered. Register the
Handset at the Deskset. Press
MENU
–>
2
–>
6
–>
1
–> .
You deregistered the
Cordless Handset on the
Handset, but the Deskset still
indicates it is registered.
Deregister the Cordless Handset on the Deskset.
On the Deskset, press
MENU
–>
2
–>
6
. If the Handset is
registered, the screen indicates
1. Handset
(Registered)
. Press
1
–>
to deregister the
Handset.
Call Appearance mode
only—
You cannot make or
receive phone calls on the T1
channels.
Incoming or outgoing calls
using the T1 trunk are
attempted before the
SYN/ACT LED is
GREEN
.
Press the
RESET
button on the front panel of the
T1 Gateway for less than 5 seconds.
Wait for the SYNC LED to turn
GREEN
before making or
receiving any T1 calls or receiving calls on the
T1 Gateway.
Symptom
Probable Cause
Corrective Action
Other Deskset Features