
Deskset Settings
212
Synapse SB67030/031 Deskset and Accessories User’s Guide
Registering an Optional Cordless Headset
You can register only one AT&T SB67040 Cordless Handset and only one AT&T TL7600 Cordless Headset to a Deskset. When a
Deskset has cordless accessories, they are all part of the same extension, and only one device can be used at a time.
To register the TL7600 Cordless Headset:
Figure 293. Cordless Headset Not
Registered
1.
Call Appearance mode—
Press
MENU
, then
2
, and then
6
to display the Cordless
Settings menu shown in
Figure 288 on page 210
.
Line Appearance mode—
Press
MENU
, then
2
, and then
3
to display the Cordless
Settings menu.
2. Press
2
to display the
Cordless Headset Registration screen shown in Figure 293.
3. Press .
Registration in Progress...
appears while the Deskset searches
for the Handset.
4. When registration is complete,
Cordless Headset is currently Registered
appears and the Cordless Headset
ON/OFF
light turns solid blue.
5. Press
. The Cordless Settings menu appears.
Quick
Dial
Cordless Headset Registration
Cordless Headset is currently
Not Registered
.
Register
Exit
Place Cordless Handset in charger.
Press
Register
to begin process.
The Headset must be in the charger, otherwise registration cannot proceed.
Even if the Cordless Headset has been in its charger, remove and replace the
Cordless Headset right before you press
on the Deskset.
Registration can be terminated by pressing
CANCEL
on the Deskset.
If the Cordless Handset is registered to another Deskset, it must be
deregistered first. See
“Deregistering a Cordless Handset or Headset” on
page 213
.