5
8. Installation - Shower Valve Trim
1) Secure large shower escutcheon to Temptrol
pressure balancing valve using mounting screws
(FIGURE 8.1).
2) Install dome cover and lock nut to valve by turning
clockwise (FIGURE 8.2).
FIGURE 8.1
FIGURE 8.2
FIGURE 8.3
9. Installation - Diverter Valve Trim
2) Secure small diverter escutcheon to mounting plate.
Tabs should snap in place (FIGURE 9.2).
1) Secure small mounting plate to Symmons diverter valve
using mounting screws (FIGURE 9.1).
FIGURE 9.1
FIGURE 9.2
4) Install handle to diverter valve. Secure with star washer,
set screw and plug button (FIGURE 9.4).
3) Install dome cover and lock nut to valve by turning
clockwise (FIGURE 9.3).
FIGURE 9.3
1) Attach shower arm and flange to shower pipe. Turn
clockwise to tighten (FIGURE 10.1).
2) Install showerhead to shower arm. Turn clockwise to
tighten (FIGURE 10.2).
3) Install tub spout to stub out pipe. Turn clockwise to
tighten (FIGURE 10.3).
FIGURE 10.1
FIGURE 10.2
FIGURE 10.3
10. Installation - Showerhead & Tub Spout
FIGURE 9.4
3) Install handle to shower valve. Secure with star washer,
set screw and plug button (FIGURE 8.3).