Symmons Dia S3510PD15 Operation And Maintenance Manual Download Page 7

Symmons Industries, Inc.

  

  

31 Brooks Drive

  

  

Braintree, MA 02184

  

  

Phone: (800) 796-6667

  

■  

Fax: (800) 961-9621

Copyright © 2022 Symmons Industries, Inc.

  

  

symmons.com

  

  

[email protected]

  

  

ZV-3253 REV E

  

■  

071922

TROUBLESHOOTING CHART

PROBLEM

CAUSE

SOLUTION

Faucet no longer maintains 

accurate temperature.

Foreign matter such as copper 

chips, sand, stones, etc. clogging 

the cartridge ports and/or 

damaging the sealing surfaces of 

the cartridge.

Remove cartridge and inspect for debris. Replace cartridge if 

necessary.

Flow is irregular.

Accumulation of sediment in 

cartridge.

Remove cartridge and inspect for debris. Replace cartridge if 

necessary.

Same as above.

Accumulation of sediment in 

spray wand.

Remove and clean spray wand.

Pull-down hose will not retract.

Pull-down hose is not properly 

weighted to allow hose to 

retract.

Install counterweight to pull-down hose or adjust 

counterweight.

Handle is loose. 

Set screw has loosened. 

Tighten set screw.

Finish is spotting.

Elements in water supply may 

cause water staining on finish.

Clean finished trim area with a soft cloth using mild soap and 

water or a non-abrasive cleaner and then quickly rinse with 

water.

S-3510-PD-1.5 MODIFICATION REFERENCE

MODIFICATION OPTION

MODIFIED MODEL NUMBER

DELETE SUFFIX -1.5 FOR

 2.2 GPM (8.3L/MIN) AERATOR 

S-3510-PD

8 INCH DECKPLATE

(-DP)

S-3510-PD-DP-1.5

STAINLESS STEEL FINISH

(-STS)

SP-3510-STS-PD-1.5 / SK0920-PD-STS-1.5

NOTES

Summary of Contents for Dia S3510PD15








Reviews: