Symmons Dia S3510PD15, Operation And Maintenance Manual, Page: 6 / 7

Symmons Industries, Inc.
■
31 Brooks Drive
■
Braintree, MA 02184
■
Phone: (800) 796-6667
■
Fax: (800) 961-9621
Copyright © 2022 Symmons Industries, Inc.
■
symmons.com
■
gethelp@symmons.com
■
ZV-3253 REV E
■
071922
SERVICE & MAINTENANCE
1. Remove Cartridge
1. Remove lever (A) from handle hub (C) with soft jaw
pliers as to avoid damaging finish on lever handle. Use
2.5mm hex key to remove set screw (B) from handle hub.
2. Remove handle hub (C) from faucet.
3. Remove decorative collar (D).
4. Remove compression nut (E).
5. Remove cartridge (F) from faucet body. Inspect
cartridge for debris and replace cartridge if necessary.
2. Replace Cartridge
1. Orient cartridge so pegs align with holes in faucet body
(see illustration to the left for reference).
2. To install cartridge, reverse steps 1-5 in the Remove
Cartridge section above.
Note: Faucets purchased before XX/2020
feature rotated cartridge orientation
(see illustration below for reference).
2
1
A
B
C
3
D
4
E
F
5
(2x)
HOLES
FOR PEGS
(2x) PEGS
CARTRIDGE
BOTTOM VIEW
IMPORTANT: Soft jaw pliers must
be used on lever handle to avoid
damaging decorative finish.
(2x)
HOLES
FOR PEGS
(2x) PEGS
CARTRIDGE
BOTTOM VIEW
FAUCETS
PURCHASED
BEFORE
XX/2020