Symmons Industries, Inc.
■
31 Brooks Drive
■
Braintree, MA 02184
■
Phone: (800) 796-6667
■
Fax: (800) 961-9621
Copyright © 2022 Symmons Industries, Inc.
■
symmons.com
■
■
ZV-3253 REV E
■
071922
FAUCET INSTALLATION
3. Connect Pull-Down Hose
1. Attach quick disconnect adapter (B) to the pull-down
hose adapter (A). Arrows on adapter ring
must
be aligned with quick disconnect release tabs
for full engagement.
Note: Press both quick disconnect release
tabs to easily disconnect adapters.
2. Orient guide (D) so arrow is facing upward. Slide
bottom of guide onto pull-down hose before
attaching top of guide.
3. Attach counterweight (C) to pull-down hose. Slide
counterweight over top of guide. Push counterweight
down so it holds guide.
4. Connect Water Supply Lines
1. Connect hot supply hose (on left side) and cold
supply hose (on right side) to supply outlets.
Notes: DO NOT use plumber putty or
plumber tape on fittings with face
seal washers or o-ring seals.
DO NOT OVERTIGHTEN fittings
with face seal washers or o-ring
seals.
1
A
B
QUICK
DISONNECT
RELEASE TABS
ADAPTER
RING
C
D
3
2
ARROW ON
GUIDE MUST
FACE UPWARD
COLD
SUPPLY
HOT
SUPPLY