3 of 5
QUICK START GUIDE:
T-10 Glass Touchscreen
www.symetrix.co
| +1.425.778.7728
PN 53-0088 Rev A 05/22
Tabletop Stand Installation Instructions
The instructions below describe how to mount the T-10 to the
optional tabletop stand (purchased separately).
Attach the four (4) included non-skid pads to the under-
side of either the upper or lower table mount bracket,
depending on which surface will be rested upon.
2.
Attach the universal flush mount wall bracket to the
upper and lower table mount stand sections using the
eight (8) included 6-32 x ¼” screws, as shown in the
image on the left.
1.
5.
To remove the T-10 Glass from the universal wall
mount bracket, insert a pry-tool (e.g. flat head
screwdriver) between the universal wall mount
bracket and the support bracket. Gently twist/rotate
the tool from one side to the other to disengage the
tabs on support bracket from the flanges on the wall
mount bracket.
