2 of 6
QUICK START GUIDE:
T-10 Glass Touchscreen
Wall Mount Installation Instructions
www.symetrix.co
| +1.425.778.7728
PN 53-0088 Rev A 05/22
Optional, if portrait mounting the touchscreen, remove the
4 screws on the T-10 Glass rear panel support bracket.
Rotate the support bracket 90 degrees so the RJ-45
points down in the desired orientation and ensure the
indicated notch in the support bracket is pointed down.
Take care not to disconnect or strain the internal cables
when rotating the bracket. Reattach with the same
screws. The same steps can be performed to convert a
portrait screen back to landscape.
Screw the universal flush mount wall bracket into the wall
mounted back box using the appropriate screws for US or
EU boxes as shown below.
1.
Connect the CAT5/6 cable to the T-10 Glass touchscreen.
3.
2.
Attach the T-10 Glass touchscreen onto the universal
flush mount wall bracket by first hooking the snaps on
the touchscreen rear panel onto the top tabs of the
wall bracket. Then press the bottom of the touchscreen
enclosure to snap the bottom hooks onto the tabs of the
wall bracket.
4.
