Series 3300 System Adminstration Manual
2 - 12
Initializing the 3300
Before the 3300 is ready to use, it must be initialized by loading the application
program. The program is stored in the terminal in non-volatile memory (NVM, also
called the application EEPROM). The program is transferred from a host computer
to the terminal over a communications line provided by either a null modem cable
or a cradle.
The procedure described here uses the sendhex command on the PC and the Pro-
gram Loader function on the terminal. For details on the sendhex command, refer
to the Series 3000 Application Programmer's Manual. Other software may be used
in place of sendhex.
Cancelling Communication
At any time during the communication session, you can cancel communications
by pressing
Clear
on the 3300. The session stops immediately.
Communication Parameters
The communication parameters specified on the host and the 3300 must match.
Typical parameters are:
38400 bps
7 bit data
Odd parity
Xon/Xoff flow control
Loading the Program
A direct connection between the Series 3300 and the host PC is made with a null
modem cable (Symbol product number 3057-F03). The cable has a male DB-25
connector at one end and a female DE-9 connector at the other end.
To download the program, do the following:
Summary of Contents for Series 3300
