manualshive.com logo in svg

Symbol PDT 7200 Series, Reference Manual

Share
Download
Symbol PDT 7200 Series Reference Manual Download Page 122

B-10

PDT 7200 Series Product Reference Guide for Windows

®

 CE

API Version

This option displays the current version of the Display API.

Audio Parameters

This option allows you to change the terminal’s beeper volume, and displays the version 
numbers for the Audio and Notify APIs.

Figure B-12.  Control Panel Audio Parameters Screen

Beeper Volume

To change the beeper volume, tap the Beeper Volume field, and the value toggles between 
Low and High. As the value changes, an example of each level of beeper sounds as a 
demonstration. Alternately, use your up and down arrow keys to highlight the Beeper Volume 
field, then use your left and right arrow keys to change the value.

API Version

This field displays the version number of the Audio API.

Notify API Version

This field displays the version number of the Notify API.

Summary of Contents for PDT 7200 Series















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands