Symbol MiniScan MS XX07 Series, Integration Manual

Page: 282 / 406

13-2
MS XX07 Series Integration Guide
The rule specifies the editing conditions and requirements before data transmission occurs.
Using ADF Bar Codes
When programming a rule, make sure the rule is logically correct. Plan ahead before
scanning.
To program each data formatting rule:
• Start the Rule . Scan the Begin New Rule bar code on page 13-8.
• Criteria . Scan the bar codes for all pertinent criteria. Criteria can include code type
(e.g., Code 128), code length, or data that contains a specific character string (e.g.,
the digits “129”). These options are described in
Criteria on page 13-12.
• Actions . Scan all actions related to, or affecting, these criteria. The actions of a
rule specify how to format the data for transmission. These options are described
in
ADF Bar Code Menu Example on page 13-3.
• Save the Rule . Scan the Save Rule bar code on page 13-9. This places the rule
in the “top” position in the rule buffer.
• If you make errors during this process, some special-purpose bar codes can be
useful:
Erase Criteria and Start Again , Erase Actions and Start Again , Erase
Previously Saved Rule , etc.
Erase criteria, actions, and entire rules by scanning the appropriate bar code (see page 13-
9 ).
Standard Beeper Definitions on page 3-8 help guide you through the programming steps.