Symbol MiniScan MS XX07 Series, Integration Manual

Page: 288 / 406

13-8
MS XX07 Series Integration Guide
Special Commands
Pause Duration
This parameter along with Send Pause on page 13-28 inserts a pause in the data
transmission. To set a pause, which is measured in 0.1 second intervals, scan a two-digit
number (i.e., two numeric bar codes). For example, scanning bar codes
0 and 1 inserts a
0.1 second pause; 0 and 5 inserts a 0.5 second delay. Numeric bar codes begin on page
10-132 . To change the selection or to cancel an incorrect entry, scan Cancel on page 10-
134.
Pause Duration
Begin New Rule
Scan this bar code to start entering a new rule.
Begin New Rule