manualshive.com logo in svg

Symbol MiniScan MS-120X, Integration Manual

Share
Download
Symbol MiniScan MS-120X Integration Manual Download Page 314

13-32

MS-120X and MS-220X Integration Guide

Modify Data

The following bar codes modify data in the ways listed. The following actions work for all 
send commands that follow it within a rule. Programming 

pad zeros to length 6, send next 

3 characters, stop padding, send next 5 characters,

 to add three zeros to the first send; the 

next send is unaffected by the padding. These options do not apply to 

Send Keystroke

 or 

Send Preset Value

.

Remove All Spaces 

To remove all spaces in the send commands that follow, scan this bar code.

Crunch All Spaces 

To leave one space between words, scan this bar code. This also removes all leading and 
trailing spaces.

Stop Space Removal 

Scan this bar code to disable space removal.

Remove Leading Zeros 

Scan this bar code to remove all leading zeros.

Stop Zero Removal 

Scan this bar code to disable the removal of zeros.

Summary of Contents for MiniScan MS-120X



























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands