Symbol MiniScan MS-120X, Integration Manual

Page: 309 / 410

13-27
Advanced Data Formatting (MS-1207/MS-2207 Only)
Setup Field(s)
Table 13-1. Setup Field(s) Definitions
Parameter Description Page
Move Cursor
Move Cursor To a Character
Scan the Move Cursor To Character
bar code on
page 13-28
, then any printable ASCII character
from the Alphanumeric Keyboard . When this is
used, the cursor moves to the position after the
matching character. If the character is not there,
the rule fails and ADF tries the next rule.
13-28
Move Cursor to Start of Data
Scan this bar code to move cursor to the beginning
of the data.
13-28
Move Cursor Past a Character
This parameter moves the cursor past all
sequential occurrences of a selected character.
For example, if the selected character is ‘A’, then
the cursor moves past ‘A’, ‘AA’, ‘AAA’, etc. Scan
the Move Cursor Past Character
bar code on page
13-28
, then select a character from the
Alphanumeric Keyboard . If the character is not
there, the cursor does not move (i.e., has no
effect).
13-28
Skip Ahead “N” Characters Scan one of these bar codes to select the number
of positions ahead to move the cursor.
13-29
Skip Back “N” Characters
Scan one of these bar codes to select the number
of positions back to move the cursor.
13-30
Send Preset Value Send Values 1 through 6 by scanning the
appropriate bar code from
Prefix/Suffix Values on
page 9-108. These values must be set using the
prefix/suffix values in
Table A-1 on page A-1 and
Table A-2 on page A-7 .
Value 2 = Scan Prefix
Value 1= Scan Suffix 1
Value 3 = Scan Suffix 2
13-31