manualshive.com logo in svg

Symbol MiniScan MS-120X, Integration Manual

Share
Download
Symbol MiniScan MS-120X Integration Manual Download Page 260

10-18

MS-120X and MS-220X Integration Guide

ACK/NAK with ENQ

This combines the two previous options.

ACK/NAK with ENQ

XON/XOFF

An XOFF character turns the scanner transmission off until the scanner receives an XON 
character. There are two situations for XON/XOFF:

•

XOFF is received before the scanner has data to send. When the scanner has data 
to send, it waits up to Host Serial Response Time-out for an XON character before 
transmission. If the scanner does not receive an XON within this time, it issues an 
error indication and discards the data.

•

XOFF is received during a transmission. Data transmission then stops after 
sending the current byte. When the scanner receives an XON character, it sends 
the rest of the data message. The scanner waits indefinitely for the XON.

XON/XOFF

Summary of Contents for MiniScan MS-120X



























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands