manualshive.com logo in svg

Symbol LT 1804, Product Reference Manual

Share
Download
Symbol LT 1804 Product Reference Manual Download Page 47

4-22

LT 1804 Product Reference Guide: Programming the LT 1804

Software Handshaking

The scanner also provides two software handshaking options, ENQ and ACK/
NAK, selected by parameter menus.

These software handshaking options operate in addition to, and are 
subordinate to, the hardware handshaking. They can be used separately, in 
conjunction with each other, or not at all. They operate in the following 
manner:

•

When the ENQ is enabled, the scanner waits for an ENQ, Enquire, 

character from the host before it transmits data. The host must respond 
within the programmable response timeout period or the scanning unit 
beeps 4 times, indicating transmission error and loss of the last scanned 
data.

•

When the ACK/NAK is enabled, after the scanning unit has transmitted 

data, it looks for one of the following responses:
<ACK> acknowledging a valid accepted transmission, or
<NAK> indicating a problem with the transmission.

The scanner then retransmits the data. After three unsuccessful 
transmission attempts, the unit aborts any further communication 
attempts on the current message. It indicates this by sounding 4 long 
(1 second) beeps.

See 

Handshaking Sequence on page 4-23

.

Summary of Contents for LT 1804


































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands