manualshive.com logo in svg

Symbol LT 1804, Product Reference Manual

Share
Download
Symbol LT 1804 Product Reference Manual Download Page 31

4-6

LT 1804 Product Reference Guide: Programming the LT 1804

EAN Zero Extend

This parameter adds five leading zeros to decoded EAN-8 symbols to make 
them compatible in format to EAN-13 symbols.

I 2 of 5 to EAN-13 Conversion

This parameter converts a 14-character I 2 of 5 code into EAN-13, and transmits 
to the host as EAN-13. In order to accomplish this, the I 2 of 5 code must be 
enabled, one length must be set to 14, and the code must have a leading zero 
and a valid EAN-13 check digit.

CLSI Editing

Use this parameter to insert a space after the 1st, 5th, and 10th characters of a 
14-character Codabar symbol. The symbol length includes start and stop 
characters.

NOTIS Editing

This option strips the start and stop characters from decoded Codabar 
symbols.

Decode UPC/EAN Supplemental

Select whether UPC/EAN is decoded with or without supplemental 
characters, or whether the unit will autodiscriminate between the two. 
Supplementals are additionally appended characters, according to specific 
code format conventions (e.g., UPC A+2, UPC E+2, EAN 8+5).

If UPC/EAN with supplemental characters is selected, UPC/EAN symbols 
without supplemental characters won't be decoded. If UPC/EAN without 
supplemental characters is selected and the scanner is presented with a UPC/
EAN plus supplemental symbol, the UPC/EAN will be decoded and the 
supplemental characters ignored. If autodiscrimination is chosen, the LT 1804 
will, after additional processing to ensure a good decode, transmit either.

Summary of Contents for LT 1804


































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands