Symbol LS4000P Series, Product Reference Manual

Page: 23 / 170

2-5
Set Up
Connecting to a Host - 1D Scanning
With some terminals, the LS 4000P is unable to answer host terminal polls until the
appropriate host type is selected. If the appropriate host type is not selected, the connected
host may generate an error message. To correct this, select the proper parameter set and
initialize the host terminal. See Chapter 5 for more information.
RS-232C
The LS 4004P scanner has two types of RS-232C connections:
!
Direct RS-232
!
Battery Operation.
Direct RS-232
For direct RS-232 connection, plug the LS 4004P interface cable directly into the serial
communication port on the back of the host. If necessary, connect a power supply to the host.
Figure 2-4. Direct RS-232 Configuration
Battery Operation
1. Insert a 9-volt battery into the battery box. Refer to Battery Box Operation on page
2-3.
Host
LS 4004P
Power Supply
(as required)
Interface
Cable