Symbol LS1203 Product Reference Manual Download Page 94

Page: 94 / 202

7 - 2

Symbol LS1203 Product Reference Guide

Connecting a USB Interface

Figure 7-1

USB Connection

The scanner connects with USB capable hosts including:

•

Desktop PCs and Notebooks

•

Apple™ iMac, G4, iBooks (North America only)

•

IBM SurePOS terminals

•

Sun, IBM, and other network computers that support more than one keyboard.

The following operating systems support the scanner through USB:

•

Windows 98, 2000, ME, XP

•

MacOS 8.5 and above

•

IBM 4690 OS.

The scanner will also interface with other USB hosts which support USB Human Interface Devices (HID).

Interface cable

USB Series A

Connector

NOTE

Interface cables vary depending on configuration. The connectors illustrated in

Figure 7-1

are examples

only. The connectors may be different than those illustrated, but the steps to connect the scanner remain
the same.

Summary of Contents for LS1203











































































































































































































Search results

Summary of Contents for LS1203

Reviews:

Related manuals for LS1203

Brands by name

Popular brands

Symbol LS1203, Product Reference Manual

Search results

Summary of Contents for LS1203

Reviews:

Related manuals for LS1203

Brands by name

Popular brands