3-2
FMT 3000 Hardware Reference Guide - Option Installation and Operation
Be sure to use proper static-sensitive device handling procedures (use grounded wrist-strap,
avoid touching components, etc.) when handling exposed electronic devices.
Installation Kit Parts List
The following table lists the items contained the installation kit supplied with a Starter kit.
Items appearing in Bold characters are also supplied in the installation kit shipped with single
unit purchases. Refer to the part ID letter for identifying hardware items associated with
installing the options discussed in this chapter.
Table 3-1. Installation Kit Parts List
ID
Part Description
Quantity
Remarks
A
Key
1
Case key lock
B
Jumper
4
Used to set CPU/Power board options (clock
speed, CMOS battery, power switch, back up)
C
2 Terminal Plug
1
AC power connector
D
Cable Ferrite
1
Internal cable filter clamp: Used to filter power,
VGA video and other cables if desired
E
4 Inch Cable Tie
2
Cable routing
F
Cable Tie Holder
1
Cable routing
G
4-40 x 1/4 Inch Pan Head Screw
4
PC/104 VGA card mounting HW
H
Fiber Washer
4
PC/104 VGA card mounting HW
I
8-32 Nut
1
Bar code wand holder mounting HW
J
8-32 x 1/2 Inch Flat Head Screw
1
Bar code wand holder mounting HW
K
6-32 x 5/16 Pan Head Screw
4
Computer bracket mounting HW
L
Rubber Foot with Adhesive
4
Case back or desk stand feet
M Velcro® Hook Strip
2
Battery pack to power board mounting
N
Velcro® Loop Strip
2
Battery pack to power board mounting
O
5/16 Jackscrew
4
COM connector clip replacement HW