
5.
Status Indicator Light
Slowly flashes blue
Back
-
up battery is not charged. The Appliance will not start working, until the
battery is fully charged.
Faster flashes blue
The Appliance is powered ON and ready to be placed on the glass
.
Solid blue
The Appliance has successfully adhered itself to the glass and is ready to clean.
Solid red
A problem occurred or the vacuum power is not sufficient (the Appliance is not
properly adhered to the glass).
For troubleshooting, see the next part (6.).
6. Troubleshooting
No.
Malfunction
Possible Causes
Solutions
1
Status Indicator light
flashes BLUE when
the
Appliance is
adhered to glass
Cleaning pads was not
installed properly
Remove the cleaning pads
and attach
properly
on
the
Velcro
Edge detection sensor has
a
problem
Check if the edge detection sensors was stuck by cleaning pad
or dirt
There is too much dirt
and debris on the window
Clean the small part of window by hand to have a clean area
for the
Appliance
to
adhere there first
2
Status Indicator light
shines
solid RED
Interruption of electricity
while the Appliance was
cleaning
Connect the Appliance to the power adapter and plug into
the wall outlet
In other cases,
direct the Appliance using remote control
to
a
position on the window where you can safely reach it
and
remove it from the window
The appliance has moved
over a problem area
and
is losing suction
U
se the remote control to direct the Appliance to a safe
position and remove it from the window if needed
Edge detection sensors
have a problem
Please check if edge detection sensors were
stuck and clean
the dirt
on them; if it still does not work, please contact
customer service
3
The Appliance
moves
in
an irregular pattern
The cleaning area is too
dirty
Clean the driving treads as described in section 4.3
Replace the cleaning pad and restart the cleaning cycle
4
Remote control does
not work
While the Appliance is
in
cleaning mode,
only
the
START/PAUSE button
works
Press START/PAUSE button to stop cleaning first, then press
other buttons to command the Appliance
38
EN
www.symbo.eu
Summary of Contents for WEEBOT W130
