Symbo WEEBOT W130, User Manual, Page: 38 / 44


The Appliance should only be used with the Appliance’s cleaning solution. Using other cleaners significantly reduces
the Appliance’s performance and can damage the robot.

Please refer to the glass manufacturer's care and cleaning instructions before using the Appliance on glass with
an uneven surface, such as frosted, textured, patterned, or coated glass. Product manufacturer nor the seller
cannot be responsible for any damage due to improper use on these surfaces.
3.2 Atta ching the Cleaning Pad
Turn the Appliance over and attach the Cleaning Pad to the bottom of the Appliance
smoothly. The white side of the Cleaning Pad attaches to the Velcro, and the grey
microfiber side faces out. Make sure the cleaning pad does not cover the edge
detection sensors, front bumper sensors and rear bumper sensors .
3.3 Assembling the Power Adapter
Plug the power cord to adapter like in the image below. You can also connect extension cord from the other side. First,
connect the Appliance, and then plug the power cord to electricity.
3.4 Install ing the Safety Tether
You will need : A: power cord, B: power adapter with cord, C: safety pod, D: safety tether
Loop one end of the Safety Tether to end of power cord and tight . Then connect power cords together. After that loop
the other end of the Safety Tether around the Safety Pod’s channel and pull it tight. Make sure that the length
of the power cord does not restrict movement of the Appliance. If it is so, use the extension cord .
A
B
C D
35
www.symbo.eu