Symbo WEEBOT W130, User Manual, Page: 39 / 44

3.5 Place the Safety Tether and Pot
If the Appliance is being used to clean an inside window, press the safety
pod firmly on the top corner of the inside window. Make sure the safety pod
is attached securely in place. If the Appliance is being used to clean
an outside window, press the safety pod firmly on the inside of the window
being cleaned. Make sure the safety pod is attached and securely hold
in place .
3.6 Spray Cleaning Solution
The Appliance is recommended to be used with the original cleaning solution (eventually with clean water). Using other
cleaners may reduce its performance .
3.7 Start
1. Plug in the power cord.
2. Move the power switch to the on position (– ) . The status indicator light begins to flash
blue .
3. Place the Appliance on the window at least 10 cm from window corners or other
obstacles . Push the START/STOP button on the Appliance while still holding
the Appliance. When the Appliance successfully attached to the window, the status
indicator light glows a continuous blue . So, you can safely release the Appliance, now .
4. Start the Appliance using one of the following methods: press
the START/PAUSE button on the Appliance or on a remote control
(cleaning path will be chosen automatically), eventually choose the
cleaning path by using the N or Z button on a remote control.
36
EN
www.symbo.eu