Symbo D410, User Manual

Page: 54 / 88

Mopping
This robotic vacuum cleaner has a wet mopping function.
1. Attach the moistened mop cloth to the mop holder.
2. Attach the mop holder with the cloth to the robot from below (insert pins into holes).
3. Pour water into the water tank (we recommend using clean water; you can apply any detergent directly to the
fabric)
4. Place the water tank into the robotic vacuum cleaner (in the place of the original dust bin)
5. Press CLEAN to start mopping (the robot will recognize this mode automatically)
6. When cleaning is complete, disconnect the mop holder and remove the water tank. Pour excess water out of
the tank and clean the mop cloth for future use.
Notes:
• In the mopping mode, vacuuming is off, only side brushes work.
• Prevent the vacuum cleaner from entering a carpet or dangerous area by a physical obstacle or a virtual wall (not
included).
• It is possible to mount the mop holder for dry wiping when vacuuming.
• We recommend washing the mop cloth by hand, but it can also be done by wasching machine at low temperatures
and without the use of fabric softener.
Warning:
• Use the mopping function only under adult supervision.
• Water drips from the water tank spontaneously, so make sure that the robotic vacuum cleaner does not stay in the
same place for a long time to prevent excessive water leakage in one place.
• Do not charge the robotic vacuum cleaner with the water tank inside and the mopping cloth attached.
PRODUCT OPERATION
9