Symbo D410, User Manual

Page: 53 / 88

PRODUCT OPERATION
8
Starting up / Pause / Sleeping
1. Starting up
A. Make sure the power switch is on.
B. Press CLEAN button on main body or on remote control to start cleaning.
Note: If robot is in sleeping mode, press CLEAN button to wake the robot up from sleeping mode. Then press CLEAN
for a second time, the robot starts cleaning automatically.
2. Pause
Press CLEAN button on main body or on remote control to exchange robot from cleaning mode to selected mode.
3. Sleeping mode
To turn robot into sleeping mode from selected mode. Keep pressing CLEAN on main body for 3 seconds.
Scheduling
• The vacuum cleaner will always start cleaning at the set time.
• Press the ,,PLAN” button on the remote control to enter the ,,Schedule Cleaning” mode.
• Use the directional buttons at the top half of the remote control display (HH: MM) to set the start for the schedule
cleaning
• Press the “PLAN” button again to confirm the set time.
• To erase the set time, turn the vacuum cleaner off.
• Successful schedule cleaning setting will be confirmed by a beep sound on the vacuum cleaner.
Electrowall
The virtual wall creates an invisible wall that the robotic vacuum cleaner can
not cross. You can, for example, prevent passage to the next room, prevent
climbing on high-pitched carpets, protect fragile objects, or define the area
with cables
1. Put the battery firstly, then turn it on.
2. Put the Electrowall on the outside of the doorway you wish to block.
3. Turn off the Electrowall after each use.
Virtual wall divides the space into two areas, which are marked on the virtual
wall: WORKING AREA and FORBIDDEN AREA. Please, place the virtual wall
accordingly.