Symantec WISE LINUX PACKAGE EDITOR 8.0 Page 2 Reference Download | Manualshive

Page: 2 / 69

background image

Linux Package Editor Reference

2

Wise Linux Package Editor

The software described in this book is furnished under a license agreement and may be used only in accordance with the terms of the
agreement.

Documentation version 8.0

Legal Notice

Copyright © 2009 Symantec Corporation. All rights reserved.

Symantec, the Symantec Logo, and Altiris are trademarks or registered trademarks of Symantec Corporation or its affiliates in the U.S. and
other countries. Other names may be trademarks of their respective owners.

The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse
engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Symantec
Corporation and its licensors, if any.

THE DOCUMENTATION IS PROVIDED “AS IS” AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE
DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. SYMANTEC CORPORATION SHALL NOT
BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS
DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.

The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to
restricted rights as defined in FAR Section 52.227-19 “Commercial Computer Software - Restricted Rights” and DFARS 227.7202, “Rights in
Commercial Computer Software or Commercial Computer Software Documentation”, as applicable, and any successor regulations. Any use,
modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government
shall be solely in accordance with the terms of this Agreement.

Symantec Corporation
350 Ellis Street
Mountain View, CA 94043

http://www.symantec.com

«
1
2
3
4
...
»

Summary of Contents for WISE LINUX PACKAGE EDITOR 8.0






































































Reviews:

No comments

Related manuals for WISE LINUX PACKAGE EDITOR 8.0

DEEP FREEZE - INTEGRATING WITH NOVELL ZENWORKS...

Brand: FARONICS Pages: 23

D-NE329SP - Atrac Cd Walkman Portable Player

Brand: Sony Pages: 2

D-NE20 - Atrac Cd Walkman

Brand: Sony Pages: 2

D-NE326CK - Atrac Cd Walkman Portable Player

Brand: Sony Pages: 2

D-NE329SP - Atrac Cd Walkman Portable Player

Brand: Sony Pages: 32

D-NE1 - Portable Cd Player

Brand: Sony Pages: 34

D-NE326CK - Atrac Cd Walkman Portable Player

Brand: Sony Pages: 35

D-NE1 - Portable Cd Player

Brand: Sony Pages: 116

Cycos ERGO mrs 5.0

Brand: Cycos Pages: 46

ILLUSTRATOR CS2 12.0.1

Brand: Adobe Pages: 6

Brand: Adobe Pages: 8

38043740 - ColdFusion Standard - Mac

Brand: Adobe Pages: 87

38039927 - Fireworks CS3 - PC

Brand: Adobe Pages: 369

Brand: Adobe Pages: 478

Laptop Camera Controller flex LCC

Brand: ARRI Pages: 10

CLUSTER SUITE - FOR RHEL 4

Brand: Red Hat Pages: 74

SYSMAC CX-Programmer 9

Brand: Omron Pages: 232

Topo North America 9.0

Brand: DeLorme Pages: 257

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands