Symantec Veritas Cluster Server 5.0 Update 3 Installation Manual Download Page 50

Page: 50 / 176

To check the systems

Navigate to the folder that contains the installvcs program.

See

“Mounting the product disc”

on page 49.

Start the pre-installation check:

./installvcs -precheck galaxy nebula

The program proceeds in a noninteractive mode to examine the systems for
licenses, RPMs, disk space, and system-to-system communications.

Review the output as the program displays the results of the check and saves
the results of the check in a log file.

Preparing to install VCS

Performing preinstallation tasks

Summary of Contents for Veritas Cluster Server 5.0 Update 3

















































































































































































Search results

Summary of Contents for Veritas Cluster Server 5.0 Update 3

Reviews:

Related manuals for Veritas Cluster Server 5.0 Update 3

Brands by name

Popular brands

Symantec Veritas Cluster Server 5.0 Update 3, Installation Manual

Search results

Summary of Contents for Veritas Cluster Server 5.0 Update 3

Reviews:

Related manuals for Veritas Cluster Server 5.0 Update 3

Brands by name

Popular brands