Symantec Veritas Cluster Server 5.0 Update 3, Installation Manual

Page: 125 / 176

# rpm -i VRTScutil-5.0.33.00-RU3_GENERIC.noarch.rpm
#
rpm -i VRTSatClient-4.3.28.0-0.ppc.rpm
# rpm -i VRTSatServer-4.3.28.0-0.ppc.rpm
■
SLES10/ppc64, required RPMS
# rpm -i VRTSvlic-3.02.33.4-0.ppc64.rpm
# rpm -i VRTSperl-5.10.0.1-SLES10.ppc64.rpm
# rpm -i VRTSspt-5.5.00.0-GA.noarch.rpm
#
rpm -i VRTSllt-5.0.33.00-RU3_SLES10.ppc64.rpm
# rpm -i VRTSgab-5.0.33.00-RU3_SLES10.ppc64.rpm
# rpm -i VRTSvxfen-5.0.33.00-RU3_SLES10.ppc64.rpm
#
rpm -i VRTSvcs-5.0.33.00-RU3_SLES10.ppc64.rpm
# rpm -i VRTSvcsag-5.0.33.00-RU3_SLES10.ppc64.rpm
# rpm -i VRTSvcsdr-5.0.33.00-RU3_SLES10.ppc64.rpm
# rpm -i VRTScutil-5.0.33.00-RU3_GENERIC.noarch.rpm
# rpm -i VRTSatClient-4.3.28.0-0.ppc.rpm
#
rpm -i VRTSatServer-4.3.28.0-0.ppc.rpm
Adding a license key
After you have installed all RPMs on each cluster node, use the
vxlicinst
command to add the VCS license key on each system:
# cd /opt/VRTS/bin
# ./vxlicinst -k XXXX-XXXX-XXXX-XXXX-XXXX-XXX
Checking licensing information on the system
Use the
vxlicrep
utility to display information about all Veritas licenses on a
system. For example, enter:
# cd /opt/VRTS/bin
# ./vxlicrep
From the output, you can determine the license key, the type of license, the product
for which it applies, and its expiration date, if any. Demo keys have expiration
dates, while permanent keys and site keys do not.
125 Adding and removing cluster nodes
Adding a node to a cluster