To install and configure Ethernet cards for private network
1
Shut down VCS on Node A.
#
hastop -local
2
Shut down the node to get to the
OK
prompt:
#
shutdown -r now
3
Install the Ethernet card on Node A.
If you want to use aggregated interface to set up private network, configure
aggregated interface.
4
Install the Ethernet card on Node B.
If you want to use aggregated interface to set up private network, configure
aggregated interface.
5
Configure the Ethernet card on both nodes.
6
Make the two Ethernet cable connections from Node A to Node B for the
private networks.
7
Restart the nodes.
Configuring the shared storage
Make the connection to shared storage from Node B. Configure VxVM on Node B
and reboot the node when you are prompted.
See
“Setting up shared storage”
on page 46.
Bringing up the existing node
Bring up the node.
To bring up the node
1
Restart Node A.
2
Log in as superuser.
3
Make the VCS configuration writable.
#
haconf -makerw
4
Display the service groups currently configured.
#
hagrp -list
145
Installing VCS on a single node
Adding a node to a single-node cluster
Summary of Contents for Veritas Cluster Server 5.0 Update 3
