Symantec S450 Series, Safety And Compliance Manual, Page: 20 / 170

Chapter 3 English Instructions 20
M
ANAGEMENT
P
ORTS
(MGMT 0:0, 1:0) Two 100/1000/10G BASE-T (RJ-45) copper ports for appliance
management. The management ports connect to a management network that provides control via con-
figuration software (WebUI), console access, and command line interface (CLI). For enhanced security, the
management ports are isolated from the network traffic on the LAN ports. Each management port includes
two LEDs that exhibit the following behavior.
S
ERIAL
P
ORT
(R
EAR
P
ANEL
) One of two RS-232 serial ports that connects to a terminal (laptop or
computer) for the appliance’s initial configuration. The other serial port is located on the front panel. The
RJ-45 connector for the serial port is wired with the following pin outs.
S
MALL
R
ISER
C
ARD
(S
LOT
3) Accepts one half-height PCIe expansion card. For a list of supported expan-
sion cards and riser card installation instructions, refer to the S Series WebGuide at:
http://www.symantec.com/docs/DOC9795
L
ARGE
R
ISER
C
ARD
(S
LOTS
4–5) The S450 is equipped with either of two large riser cards: one that accepts
one full-height PCIe expansion card or one that accepts two half-height PCIe expansion cards. For a list of
supported expansion cards and riser card installation instructions, refer to the S Series WebGuide at:
http://www.symantec.com/docs/DOC9795
LED Color Description
MGMT Port Active/Link (Left)
Off No link
Solid green Linked
Flashes green Activity
MGMT Port Speed
(Right)
Off 100 Mbps
Flashes green 1 Gbps
Flashes amber 10 Gbps
MGMT Port Status LEDs
RJ-45 Pin Signal DB9 Pin Signal
1 RTS 8 CTS
2 DTR 6 DSR
3 TxD 2 RxD
4 GND 5 GND
5 GND 5 GND
6 RxD 3 TxD
7 DSR 4 DTR
8 CTS 7 RTS
Serial Port (RJ-45) Pin Outs