Table 2-1
Factory settings
Description
Default
Settings
NIC1 admin port
172.16.111.111
IP address
Default host name
BEAppliance
Host name
Default subnet mask
255.255.0.0
Subnet mask
Appliance Web UI
Administrator
User name
Appliance Web UI
P@ssw0rd, where “0” is the
number zero.
Password
Configuration guidelines
Use the following configuration guidelines to deploy new appliances. The
instructions in this section help you set up your appliance and configure it so that
you can start using the appliance quickly. Post-configuration tasks for your system
can be performed at a later date.
Before you start the configuration, make sure that you have the following
information:
■
Customer network IP address, subnet mask IP address, and gateway IP address
■
Appliance host names
■
Appliance passwords
■
Customer DNS server and suffix names
Note:
If DNS is used, make sure that the appliance host name is DNS resolvable
(FQDN and short name).
See “Configuring the appliance” on page 17.
See “Factory settings” on page 16.
Configuring the appliance
Use the following steps to set up your appliance and configure it. Ensure that you
have the necessary information to perform the configuration.
See “Configuration guidelines” on page 17.
17
Configuration
Configuration guidelines
