80 Response Rules
About response actions
■
About export flow response action
About no response action
The
None
option directs Symantec Network Security not to respond to
particular types of incidents. Selecting the None option, followed by Stop as the
next action configures Symantec Network Security to take no action in response
to specified types of incidents. SuperUsers and Administrators can also
configure Symantec Network Security to ignore specific attacks by setting a
filter.
About email notification
Alerting is a standard component of most intrusion detection systems because
security analysts must be kept informed of attack activity without having to
constantly monitor the Network Security console. Unfortunately, many IDS
products use the same interface for detection as for notification. In such a
configuration, a flood attack could prevent the console from sending email
notifications because the flood attack would overload the interface.
Symantec Network Security uses a separate, independent interface for
notification, thus enabling the Network Security console to successfully send
email notification even during an attack.
About SNMP notification
Symantec Network Security can initiate an SNMP notification in response to an
attack. The SNMP notification
option directs Symantec Network Security to
send SNMP traps to an SNMP manager with a minimum delay of 1 minute
between responses. The IP address of the SNMP manager must be provided, and
the SNMP manager made aware of the Management Information Base (MIB).
Refer to the SNMP manager documentation for this information.
About TrackBack response action
Symantec Network Security provides the TrackBack
™
response to track attacks
back to their sources. This capability is especially important for tracking
denial-of-service attacks that must be traced to their source in order to shut
them down most effectively. TrackBack automatically tracks a data stream to its
source within the cluster, or, if the source is outside the cluster, to its entry
point into the cluster. It does this by gathering information from routers or its
own sensor resources. Sensor require interfaces with applied protection policies
to run, as well as sensor parameters for flow statistics.
Summary of Contents for 10268947 - Network Security 7160
