4:Push the left joystick (throttle) up
to the highest point and then pull
down to the lowest point. When
the indicator lights in the drone
change from quick flashing to the
continuous lighting, it means that
the drone goes into the flight
standby mode.
3:Press and hold the power button
on the top of the drone to make
sure the drone is turned “ON”.
Method 1:Push the left joystick (throttle)
to the highest point and then
back to the center, the blades
of the drone start rotating slowly.
2.Turning on the drone
Method 2:Push the left and right joysticks
to the bottom inner corners for 1
second, the blades of the drone
start rotating slowly.
Method 3:When the drone is stationary,
press the button B, the drone
automatically takes off and
hovers at a certain height.
B
Step
Step
1.If the drone is out of the range of the flight, the indicator light will
flash slowly, and then slow down.
2.When the remote control is switched off or the power is cut off, the
drone will automatically slow down to stop.ln the process , open
the remote control to control again.
-6-
