●Push the left joystick (throttle) on the remote
control up to the farthest position and then
pull down to the farthest position. When the
remote control issues a long “beep” sound, it
means the frequency and defining forward
direction functions are completed.
②
Toggling between headless function and normal function:
9.Headless Function:
①
Defining forward direction:
●Press on the power button of the remote
control.
●Connect the battery to the drone, press the
power button of the drone, and adjust the
specified direction of the drone’s head under
the headless mode as the new forward
direction.
●After the drone is matched with the
corresponding frequency, the drone would
be in normal pattern by default. At this time
the indicator light on the drone would be in
a state of on for a long time. After pressing
in on the right joystick of the remote control
for 2 seconds, the remote control would
make a sound of “beep, beep, beep” to
show that it has entered into a state of
headless mode. Press in the right joystick
for 2 seconds then a long sound of “beep”
would be heard to show an exit status.
(When under the state of headless mode,
four indicator lights on the drone flash slowly
once every four seconds).
Front
Back
Left
Right
-11-
