7. Use of each component
10
USE OF BUTTONS
•
Engine Stop Switch
Switch to this position to turn off the engine when a state of emergency.
Switch to this position and the engine can be started.
•
Electrical Starter Button
This is a starting motor button (switch) for engine starting.
With the main switch "ON", press this button while holding the front or rear brake lever will
start the engine.
CAUTION:
Release this button immediately after engine has been started, and never press the button
again to avoid damaging the engine.
This mechanism is a safety design. The engine can only be started after the front or rear brake
lever (pedal) has been applied.
Do not use light system. Turn headlight and turn signal lights to the “OFF” position when the
engine is being started.
High/Low Beam Switch
This is the high and low beam of headlight switching switch. Press this switch to switch between high
and low beams.
This is for high beam.
This is for low beam. (Please turn to low beam when riding in city)
Horn Switch
Press this button down when ignition switch is in the “
ON
” position, the horn will sound.
CAUTION:
Do not press this button when you are in the area where there’s no honking.
High/Low
Beam Switch
Turn Signal Switch
Horn Switch
HI
LO
HORN
Headlight switch
Electrical Starter
Button
Hazard switch
Summary of Contents for Wolf Classic 150
Page 1: ...OWNER S MANUAL...