7. Use of each component
9
OPERATION OF IGNITION SWITCH
“Start” position
Engine can be started in this position.
Ignition switch key can not be removed.
“Stop” position
Engine is shut off and can not be started in this
position .
Ignition switch key can be removed.
CAUTION:
Never operate the ignition switch key when the motorcycle is running. To turn the ignition
switch to “OFF”, will shut off the electrical system and that may result in a dangerous accident.
Therefore, the ignition switch can only be turned off after the motorcycle has been completely
stopped.
Always remove the key and be sure to take the key away with you after locking the steering
handle before leaving your motorcycle.
If ignition switch remains in the “ON” position for a prolonged period after the engine has been
stopped, the battery’s capacity will be reduced and this may affect the engine’s start ability. .
STEERING HANDLE LOCK
The steering handle lock is located on the steering stem
directly below the steering head.
Turn the steering handle fully to the left
Insert the ignition switch key into the lock
Turn the key clockwise, then the steering handle can be
locked.
Remove the Ignition switch key.
When unlocking, simply turn the key anti-clockwise.
NOTE:
For preventing the vehicle to be stolen, lock the
handle bar when parked.
After locked, turn of the handle bar left and right to
make sure it.
When leaving the vehicle, remember to remove the
key.
IGNITION SWITCH
ON
OFF
Steering handle lock
Summary of Contents for Wolf Classic 150
Page 1: ...OWNER S MANUAL...