Sym Track Runner 200, Service Manual

Page: 22 / 221

1. GENERAL INFORMATION
1-17
E. Clutch, driving and driving pulley
F. Poor handling
y
Clutch weights spring broken
y
Clutch outer stuck with clutch weights
y
Connection parts in clutch and shaft worn out or burned
Engine can be started but
motorcycle can not be moved.
FAULT CONDITIONS
PROBABLE CAUSES
y
Drive belt worn out or deformation
y
Ramp plate of movable drive face damaged
y
Driving pulley spring broken
y
Clutch weights broken
y
Drive slide-shaft gear groove broken
y
Transmission gear damaged
Engine running and misfire as
motorcycle initial forward moving or
jumping suddenly (rear wheel
rotating as engine in running)
Poor initial driving (Poor climbing
performance)
y
Drive belt worn out or deformation
y
Weight roller worn out
y
Movable drive face shaft worn out
y
Driven pulley spring deformation
y
Driven pulley shaft worn out
y
Greased in drive belt and driven face.
To this chapter contents
Steering is heavy
FAULT CONDITIONS
PROBABLE CAUSES
y
Damaged steering bearing
y
Damaged steering shaft bushing
One wheel is wobbling
Vehicle pulls to one side
y
Bent rim
y
Improperly installed wheel hub
y
Excessive wheel bearing play
y
Bent swing arm
y
Bent frame
y
Swing arm pivot bushing excessively
y
Worn
y
Bent tie-rod
y
Incorrect tie-rod adjustment
y
Rear tie air pressure incorrect
y
Improper wheel alignment
y
Bent frame