2.INSPECTION/ADJUSTMENT
2-8
Install the valve adjuster caps and generator cap.
NOTE:
IGNITION TIMING
Use the standard tester to check the ignition timing.
Spark plug inspection and adjustment.
Replace the coil if there is no sparks at plug.
IGNITION TIMING INSPECTION
Remove the generator cover and check the ignition
timing with a timing light.
Timing is correct if the index mark aligns with the
“F”mark within ±3
°
at 1500rpm.
Ignition timing :10
°
BTDC/1500rpm.
Ignition coil continuity test :
Check the resistance of the primary coil
and secondary coil.
1.Primary coil
0.31±0.03
Ω
2.Secondary coil
4.0±0.4k
Ω
Check the O-ring for damage and spread oil before
installing the caps.
The C.D.I.ignition timing is not adjustable.
If the ignition timing is not correct ,check the C.D.I.unit
and A.C.generator and replace any faulty parts.
O-RING
