10
•
Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to “ON”, and slide the turn signal switch to left or right. Then, the turn signal lights will
flash.
To release, simply return the turn signal light button to the original position.
Right-side turn signal light flashing means you intend to make a right turn.
Left-side turn signal light flashing means you intend to make a left turn.
SAFETY HELMET HOOK
•
Hang helmet from chin strap or from D-Rings buckle onto the hook securely.
CAUTION:
•
Do not hang the helmet onto this hook when you are riding to avoid damaging scooter body cover and
loosing helmet’s function.
SEAT LOCK
•
Unlock:
Insert the ignition switch key and turn to left to unlock.
•
Unlock:
Push “
Seat open”
button down when ignition switch is in the “ON” position, the seat can be unlock.
•
Lock:
Push the seat down and it will be locked automatically.
After the seat has been locked, check it again to make sure it has been locked securely by lightly
lifting the seat.
CAUTION:
•
Do not put the key inside the luggage box after unlocking to avoid the key being locked inside the
luggage box when the seat is pressed down automatically.
•
Be sure to remove the key after the seat has been locked.
LUGGAGE BOX
•
This box is located under the seat.
•
Maximum load capacity: 10kg.
•
Do not store valuables in the luggage box.
•
Make sure that the seat has been locked completely after it was pressed down.
•
Take out valuables before washing it to avoid wetting these objects.
•
Do not put any fresh products in the luggage box because of engine’s heat and high temperature.
CAUTION:
•
Make sure to take the key away with you before you lock your seat.
7.Use of Each Component