background image

 

2. Before Riding

 

This manual describes the correct usage of this scooter including safety riding, simple inspection methods 
and so on. 
For a more comfortable and safety riding, please read this manual carefully. 

For your benefit, please ask your authorized

 SYM

 dealer the operating manual and carefully read the 

following: 

  Correct use of the scooter. 

  Pre-delivery inspection and maintenance. 

 

Thank you very much for your patronage 

In order to maximize your scooter’s performance, a periodical inspection and maintenance should be 
completely carried out. 
We recommend that after riding your new scooter for the first 300 kilometers, you should take your 
scooter to the original dealer for an initial inspection, and to have your scooter inspected periodically 
every 1000 kilometers thereafter. 

 

 

 

In case the scooter’s specifications and construction are modified and different from the photos and 
diagrams on the owner’s manual / catalogues, the specifications and construction of the actual scooter 
shall prevail. 

 

3. Safe Riding 

It is very important to be relaxed and clothe properly when driving, and observe traffic regulations. Do not 
rush and always drive carefully. 
Usually, most people would ride their newly bought scooter very carefully, but after they became familiar 
with their scooters, they tended to become reckless which may result in an accident. 

 

 

To remind you:

 

 Please wear a safety helmet, and properly tighten the chin belt when riding a scooter. 

 Clothes with open or loose cuffs may be blown by wind and cause the cuffs to get caught on the 

steering handle and thus affects riding safety. 

 So, put on clothes with tight sleeves. 

 Hold the steering handle by both hands when riding. Never ride with only one hand. 

 Observe the speed limit. 

 Wear suitable low-heel shoes.

 

 

Perform periodical maintenance and inspection in accordance with the schedule.

 

 

 

  WARNING!! 

 To avoid getting burned by exhaust pipe when taking a passenger. Make sure your passenger has 

put his/her feet on the pedals. 

 After running, the exhaust pipe is very hot, be careful not to get burned when conducting an 

inspection or maintenance. 

 After running, the exhaust pipe is very hot; select a suitable location to park your scooter to avoid 

others getting burned by the exhaust pipe.

 

 

 

  CAUTION: 

 Modified scooter will affect its structure or performance, and cause poor engine operation or exhaust 

noise, which will result in shortening the scooter’s service life. 
Besides, modification is illegal and does not conform to the original design and specifications. 
A modified scooter will not be covered by warranty; therefore, do not modify your scooter at will. 

 Tire and rim modifications will make it unsafe to ride and may cause severe injury or death. 

 

Summary of Contents for CRUiSYM A







































Reviews: