Motion Detect Zones:
6. SYSTEM SET(I) -
KEY BUZZER
:
[Y]
When enabled, a tone will sound for each key press on the unit.
LOSS BUZZER
:
[Y]
When enabled, a tone will sound when video signal is lost.
QUAD LINE
:
[Y]
This option activates/deactivates the border-line separation in
Quad Mode.
BLANK COLOR
:
[BLUE]
This allows you to toggle the blank screen color from Blue, Gray or
Black
SLAVE OUT
:
[QUAD]
This selects whether the Slave output will be QUAD always, or
ACTUAL, which outputs what is shown on the display.
TITLE/TIME
:
[TL/TR]
This allows you to change the OSD position for the camera Titles
and Time. The default setting is Top Left for Tile and Top Right for
Time.
PAN/TILT
:
PAN/TILT
Enables/Disables Pan Tilt support on Channel 1.
ALARM OUT
:
N/O
This selects whether the Alarm Output will be a Normally Open or
Normally Closed activation.
DEFAULT SET
:
[N]
Selecting Yes for this option sets all program settings including
Time/Date back to their factory defaults.
7. SYSTEM
SET(II)
HDD INFO DISP :
[BYTE]
This option selects whether the OSD Hard Drive information will
be shown as [BYTE} for number of remaining bytes or [PERCENT]
for the percent of the drive remaining.
RS-232 BAUD
RATE
:
[OFF]
This sets the RS-232 baud rate if connecting to a PC for control of
the DVR. Selectable baud rates are [2400], [4800], [9600] and
[19200]
PASSWORD :
[N]
This option determines whether a password will be required to
enter the setup menu.
PASSWORD
SET
:
[0000]
If password protection is desired, enter the password in this
section. Press Enter when complete.
8. HDD/REC
SET
REC QUALITY
:
[BEST]
Select the quality setting to be used for recording – [LOW],
[NORMAL], [HIGH], or [BEST]
00
02
03
04
01
05
Summary of Contents for SY17TD8144-A
Page 14: ...IR Remote Control Functions...
